2.5 Volume
The Volume knob lets you adjust the audio level of the speaker and headphones.
2.6 Pinpoint
The Pinpoint button, when pressed, allows you to locate the target under the coil. The Pinpoint
function may also be used as a non-motion All Metal mode.
2.7 Headphone Jack ¼”
DeepTech recommends the use of headphones. When headphones are plug in, the speaker is
automatically deactivated.
There a many advantages to using headphones:
-
Improves battery life.
-
Prevents the sounds from annoying bystanders.
-
Allows you to hear subtle changes in the sound and faint signals from deep targets more
clearly.
WARNING!
Set your headphone volume prior to wear. Ensure that the headphone volume does
not reach an extremely loud level. This may increase the risk of hearing damage.
2.8 LED Battery Control
There is an indicator “Low Bat” on the face plate of the control box. If the indicator lights up and
stays on, the batteries are almost totally exhausted. At this stage, stop detecting and replace the
batteries. If the indicator blinks when a target is detected, the batteries are low. In this case, it is
best to replace the batteries at this time. The average battery life is about 20-25 hours. Extremely
weak batteries may the reason for false signals. DeepTech strongly recommends to use 8 x 1,5 V
AA Alkaline batteries. When using rechargeable batteries, we strongly recommend using batteries
with more than 2000mA/H.
-
Remember, the power consumption increases when searching with the Booster ON.
10
