VISTA X INSTRUCTION MANUAL BY DEEPTECH
8
right when in Standard Disc Mode with either of the toggle switches under the control box
in the middle position, the bigger the size and higher conductivity of target will be
discriminated.
2.6.
Alternative Discrimination
Your alternative discrimination has exactly the same operation as your main discrimination,
but the alternative discrimination is activated with the forward push and hold of either toggles
switches under the control box, this now gives you the option to quickly check targets with
your desired amount of discrimination that you’ve preset on your alternative discrimination.
So at certain points of the alternative discrimination range you can gauge what the target
maybe under the coil by the point the audio changes from a high tone to a low tone.
So if you’re searching in a park and you establish at what point a certain coin turns from a
high tone to a low tone then you can make the decision either to leave that target or dig.
But you always must bare in mind that by using any amounts of discrimination you may lose
many desirable items!
To maximize your chances of finding all desirable items then all metal mode with serve you
best, but you will dig all metallic items ferrous and non-ferrous.
2.7.
Iron Volume – Two functions in one knob, Iron Silent
discrimination
This knob allows you to adjust the audio level of the low tone (the iron signal) in Two Tone
Mode. Iron has a very special signature that can be recognized with ease. We have assigned
it a low toned sound together with a volume setting so that you can make the tone more or
less conspicuous to suit your personal preference.
When in Two Tone Mode, this knob allows for improved site analysis and understanding of
the detected area in order to find areas of former human occupancy. It also facilitates
recognition of large ferrous objects (such as old weapons).
Remember, certain types of moist ground paired with a low mineral content may also trigger
low tone signals or chatter, by adjusting the IRON VOLUME setting you’re able to reduce or
entirely eliminate this phenomenon which is related to high frequency detectors. also very
