Boat
GB
21
Preparing to install the BG201:
Read the installation instructions thoroughly before you begin!
Take care when cabling, connecting cables and connecting to ground. Remember that
moisture in the cable connectors can easily lead to corrosion. The installation should be
checked annually in order to guarantee the function of the immobilizer.
If a fused connection is required, separate fuses must be used. Unfused circuits may
cause fires if the cables are pinched or otherwise damaged.
Installation instructions must be followed. DEFA AS waives all liability to damages in the
case of damage that is caused by incorrect installation.
Document your installation!
This makes future service and trouble shooting of the immo-
bilizer easier.
TABLE OF CONTENTS
Installing the BG201
22
Connection diagram:
- without electrical fuel pump
26
- with electrical fuel pump
27