3
Main Display Interface
SuperDVR & TD Series Cards
User Manual
28
3.3.5 Sensor Alarm Record Mode
Users can use sensors to trigger sensor alarm record for relative channels. At
that time, the record status indicator light will turn red
.
3.3.6 Motion Detection Record Mode
It will enable the system to detect image changes and begin to record by
activating motion detection and motion alarm record. For instance, somebody
opens the door, and the system detects image changes and begins to record,
then users can play back the recorded file and find out who opened door.
When there is no movement, the system will not record and that is helpful for
saving system resource, and convenient for searching for event record file.
The indicator light color in the record status panel is yellow
.
NOTICE
Users may need to setup in three places to enable motion detection record.
•
Select
‘
Motion Detection
’ for certain channels in ‘
Basic Configuration
’.
•
Configure the motion detection areas for certain channels in ‘
Motion Detection
Configuration
’.
•
Configure working schedule for certain channels in ‘
Schedule Configuration
’.
3.3.7 Schedule Record
Users can set working schedule for all kinds of record modes in ‘
Schedule
Configuration
’. The bottle-green light
in record status panel shows the
corresponding channel is in Schedule Record mode. Users can change
record mode to manual record at any time, and the bottle-green light
will
change into viridescent light
.
Please refer to ‘4.4 Configuration’ for details.
3.3.8 Recycling Record
If users enable Recycling Record function and all the selected HDD partitions
are full, the former record data will be covered by the latest record data.
Users can set recording storage sequence for HDD partitions. The recording
storage will automatically jump to the next partition when it’s full. If all the
partitions are full and recycling record mode has been enabled, the new data
will overwrite the former recorded data automatically. Users can also set HDD
minimum storage alarm. Then once the present storage space is less than the
minimum storage and recycling record mode has not been enabled, the
record will automatically stop.
