- 10 -
(C)
Activation switch is not initially in ON position
Mounting hole is closed when
switch is in initial position
ON
DEACTIVATE
Lift up Stop and
END-OF-LIFE signals
are initiated
S
TO
P
S
T
O
P
slide to Stop
To activate CO Monitor,
slide the monitor down
onto mounting plate, or
slide to left to
permanently deactivate
CO Monitor when
S
T
O
P
(D) Monitor is activated when switch is in ON position
Mounting hole is open when
switch is in ON position
ON
DEACTIVATE
S
T
O
P
Lift up Stop and
END-OF-LIFE signals
are initiated
S
TO
P
S
T
O
P
slide to Stop
To activate CO Monitor,
slide the monitor down
onto mounting plate, or
slide to left to
permanently deactivate
CO Monitor when
If the activation switch is not set to ON position, as in diagram (D), the mounting hole at
top of monitor will be blocked, and the CO monitor will not be activated.
The model LL6070 is a sealed lithium battery powered wall mounted Low Level CO
Monitor. Two lithium battery cells are permanently sealed with soldered connections,
and cannot be removed. No battery replacement is required, and the factory sealed
batteries should power the monitor for up to five years under normal operation.
