Model # SP5
2
SETUP
1. Screw the mounting bracket into the camera’s mounting hole,
turning it clockwise.
2. Unless you have purchased additional wiring, mount the
camera in the desired location no more than 60 feet from the
TV/Monitor/VCR DVR. You may wall mount or desk mount these
cameras.
3. Adjust cameras to the desired viewing angles.
1. Plug the 4 PIN DIN female connection
on the camera into the 4 PIN DIN male
connection on the 60ft video/power wire.
2. Match the two arrows on top of both
connecting cables.
3. Plug the camera’s power supply into the
power jack located on the 60ft video/
power wire.
4. Plug the camera’s power adapter into an
AC outlet.
1
2
3
4
•
The camera should be installed between 8 and 13ft above the area to be monitored
•
Ensure there are no obstructions in the camera’s view, to maximize viewing area
•
Ensure that the sunshade is positioned to avoid glare and position camera away from direct sunlight
•
Decide whether the camera will be wall-mounted or sit on a desk/table top. If wall mounting, use the mounting hardware in
the package. We recommend that the mounting bracket is secured using the included screws for all installations
•
This camera comes with 60ft of video/power wire. Please make sure that you mount the cameras no more than 60ft from the
TV/monitor/VCR/DVR
•
We recommend using a surge protected power bar to protect the cameras internal circuitry
MOUNTING THE CAMERA
CAMERA INSTALLATION
Follow these instructions for the installation of each camera. The 60ft video/power wire has two connections: one for video out,
and one for power.
CONNECTING THE CAMERA
