7
•Only charge the gyroboard with the
charger provided by the manufacturer.
•Prohibited to charge the lithium battery
when
it
has
been
excessively
discharged.
BATTERY CHARGING
•Ensure the power socket is dry.
•Open the rear of the gyroboard charge
cover.
•Plug the charger head to the power
supply (11 OV-240V;50-60Hz), confirm
the charger green indicating lamp is
normal light, insert another head of the
charger into the gyroboard.
•When the red indicating lamp in the
charger is lighting, the gyroboard
normal charging, otherwise please
check all cables connection.
•When the red indicating lamp change
to green, the gyroboard is fully charged.
Please stop charging. It might short
down the battery life if long term
charging.
•Please use the local standard plug.
•In accordance with the provisions of
the charging, storage battery, otherwise
it will damage the battery and short
down the battery life.
•The gyroboard charging time is about
2 hours. It will short down the battery
life if longer time charging.
•Please keep clean and dry in charging
condition.
•Do not charge when the power socket
is wet.
Battery in high temperature or low
temperature.
If you want to make the gyroboard run
efficiently, the temperature of the
battery must be marked within the
temperature range no matter before
charging or under charging. Close to the
recommended temperature the charge
efficiency is the highest. If too cold or
too hot, the charging time will be longer
or the battery will not fully charge.
Battery specification
SPECIFICATION
PARAMETER
BATTERY TYPE
Lithium battery
CHARGING TIME
2-3 hours
VOLTAGE
36 V
THE INITIAL CAPACITY
2-4 ah
WORKING TEMPERATURE
-15°C-50°C
CHARGING TEMPERATURE
0°C-40°C
STORAGE TEMPERATURE
(12 months)
20°C-25°C
STORAGE RELATIVE HUMIDITY
5%-95%
Precautions
in
transporting
batteries
Lithium batteries are considered to be
hazardous materials in transportation,
which need to get the local law
allowance. If you need to air the
gyroboard with lithium battery, or need
to use any other transportation way to
transit
a
single
lithium
battery
gyroboard,
please
contact
local
distributors.
Pairing and connecting gyroboard
speaker to your Mobile Phone.
1. Place your gyroboard and your Mobile
Phone within 1 meter of each other.
2. Turn on the gyroboard, if it include
the Bluetooth function, its speaker will
say "The Bluetooth device is ready to
pair".
3. On your Mobile Phone, turn Bluetooth
function on, your mobile phone will
search for accessible Bluetooth devices.
(For details, please refer to the user
guide of your mobile phone).
4. Select "Bluetooth" from the searching
device list on your Mobile Phone.
5. Wait briefly for the speaker to
discover your mobile phone. While the
speaker say "The Bluetooth device is
connected successfully", the Pairing is
finished successfully.
If you are using an iPhone or an iPad
that has been previously paired to other
gyroboard speaker, it may be necessary
to "Forget this Device" as follows: 1.
Tap Settings. 2. Tap Bluetooth. 3. Tap
the
ⓘ
icon on the right of 'Bluetooth'. 4.
Tap 'Forget this Device'. 5. Tap 'Forget
Device'. As long as the gyroboard
speaker is turned on, the iPhone should
find the speaker again, and pair with it.
DAILY MAINTENANCE
The
gyroboard
requires
daily
maintenance. Below is the related
procedures of maintenance for the
gyroboard and important operation tips.
Please ensure the power and charger
disconnected before the following steps.
It's not allowed to clean if the power
turned on or the battery charging.
Precautions before cleaning
•Ensure the power and the charger wire
are disconnected.
•With a soft cloth wipe clean the
gyroboard.
•IP54 anti-dust and splash water
standard for the gyroboard.
•Prohibited to use high-pressure water
or soak machine in the liquid to clean
the gyroboard.
Summary of Contents for DF-GR11
Page 1: ......
Page 2: ...DF GR11 GYROBOARD ГИРОБОРД ГІРОБОРД ELEKTROBOARD ...
Page 3: ......
Page 53: ...43 ...
