Page 21
Using the Ice Dispenser
Please note, ice cubes will not be ready for
the first 12 hours after switching on the
refrigerator.
In case you do not need ice, such as during
winter or in case you are on vacation, select
the ice off function.
The Ice maker produces approximately 110
cubes of ice in 24 hours and this amount
may change according to the frequency of
opening of doors, refrigerator settings and
power outage. Ice may be obtained from the
dispenser as ice cubes or crushed ice.
It is normal to get crushed ice from the
dispenser in a longer time than in getting the
ice cubes.
It is normal to get crushed ice before the ice
cubes drop if the crushed ice option had
been selected before selecting the ice cube
option.
If the ice dispenser hasn’t been used for a
long time or after a power cut the ice may
form clumps or if the ice has taken on a
change in smell or taste then the ice must be
disposed of and the icebox cleaned
thoroughly.
Warnings
No ice must be added to the ice dispenser
compartment. This may adversely affect the
ice supply or crushing the ice.
It is normal to have a couple of ice
cubes
stuck together in the icebank.
Moving parts such as blades in
a
housing at the ice outlet of the
dispenser must not be touched to avoid
injury.
Never use sharp objects to break the ice in
the icebox. This may cause damage to the
icebox.
Foods should never be placed into the
icebox for quick cooling purposes.
When the icebox is to be removed for any
reason, first press the Ice Off Button.
Ice Off
To stop ice formation, press the Ice Off
button. When the Ice Off is selected, no
water will be taken into the Icematic.
However, already existing ice can be taken
from the dispenser. To restart ice formation,
Ice Off button must be pressed again.
Warning:
If you do not use the ice dispenser, do not
forget to put the ice duct cover into the ring
inside of the freezer door.
(See. Your
Refrigerator section)
FILTER Reset Button:
The water filter should be replaced every six
months. The filter reset indicator lifts if the
water filter needs to be changed.
Press the filter Reset Button for 3 seconds to
remove the filter reset indicator warning.
Summary of Contents for DFF402
Page 28: ...Page 28...