Page 22
Using the water dispenser
Warnings
It is normal for the first few glasses of water
taken from the dispenser to be warm.
In cases where the water dispenser has not
been used frequently, a sufficient amount of
water must be drained from the dispenser to
obtain fresh water.
Spillage Tray
Any water that drips whilst using the water
dispenser accumulates in the spillage tray.
You can remove spillage tray by pulling it to
yourself or pressing on its edge (depending
on the model). You can remove the water
with a sponge or a soft cloth.
Sliding Body Shelves
The sliding body shelves can be removed by
lifting them slightly from the front, the
shelves can then be moved back and forth.
There are 2 stop points, the first allows for
the shelf to be pulled to a certain point in
order that foods placed at the back of the
shelf may be easily accessed; when the
shelf is pulled and slightly lifted upwards
when it reaches the second stop point, the
body shelf will be released.
The shelf should be held firmly from the
bottom in order to prevent the shelf from
tipping over.
The body shelf is held in place by the rails
on the sides of the refrigerator body.
The shelf may be placed on one of the lower
or upper level rails as required. The body
shelf should be pushed backwards gently
until it is completely seated.
Summary of Contents for DFF402
Page 28: ...Page 28...
