Page 9
Reversing the Door
Tools required: Philip’s screwdriver, Flat
bladed screwdriver, Hexagonal spanner.
x
Ensure the unit is unplugged and empty.
x
To remove the door, it is necessary to
tilt the unit backwards. Rest the unit on
something solid so that it will not slip
during the door reversal process.
x
All parts removed must be kept for the
reinstallation of the door.
x
Do not lay the unit flat as this may
damage the coolant system.
x
Having 2 people handle the unit during
assembly will make the job easier.
1. Unscrew the hinge cover
2. Open the door and unscrew the top
hinge. Then remove the door from the
cabinet and place it on a soft pad to avoid
any damage.
3. Remove the cover and screws from the
left side and fit them to right side.
4. Carefully lay the freezer down on the
rear of the cabinet on a soft pad. Remove
the two levelling feet first. Then unscrew
the door hinge and left foot base.
Caution! If there is a screw at the left front
corner, remove it first before fitting the
hinge.
Summary of Contents for DUF300
