Page 8
Fitting the glass lids
•
The two glass lids supplied with the unit should be fitted as follows:
•
Around the upper perimeter of the unit there are two aluminium retaining ledges each
of which has a cut out at the rear,
•
Slide the bottom right lid into the lower front ledge. Lower it through the slot at the
rear and slide to the right
•
Repeat the sequence for the upper left lid using the upper ledge and sliding to the left.
•
Ensure that the handles face up and are at the sides of the unit when the lids are closed.
NOTE
During operation, particularly in high humidity conditions, there may be some
condensation on the lids. This is normal and does not negatively affect the performance
of the freezer.
1
BOTTOM
TOP
2
FLAT TOP
SLANTING TOP
