Page 10
Reversing The Doors
We recommend that you reverse doors (if
required) before switching on for the first
time.
Tools required:
Small and medium size screwdrivers and a
pair of pliers.
Spare Parts supplied in the plastic bag:
The following parts, which are exclusively for
left hand side fitted hinge operation are
supplied in a plastic bag with the appliance:
Upper door top trim hinge covers – there are
2 different parts, one for each side of the top
trim.
Upper door middle hinge bushing / door
stopper assembly.
Keep all the parts supplied in the plastic bag
(and parts which have been removed when
reversing doors) in a safe place for possible
future re-use.
Important:
Have somebody to
assist you when moving the
refrigerator and to hold the doors
when removing / re-fitting hinges
and doors to avoid injury and
damage to the product
Please refer to diagrams supplied.
Using the screws and plastic
plugs supplied in the installation
kit inside the fridge, fit handles to
the desired side (see diagram for
locations)
NOTE:
Depends on model.
Some models have integrated
handles that are universal to left
and right hand sides and do not
need to be swapped.
Figures represented in this
instruction manual are schematic
and may not correspond exactly
with your refrigerator.
If the parts are not included in the
refrigerator you have purchased,
they may be model specific and
therefore only valid for some
models.
