background image

Page 11 

Operation procedure continued 

STARTING THE MACHINE 

• 

Close the lid. 

• 

Press the POWER ON pad. 

• 

Select the desired wash cycle ( either fully automatic FUZZY or any of the pre-
programmed washes BLANKET, ECONOMY, WOOL, SOAK or any customised pro-
gramme). 

• 

Press the START / HOLD pad. 

• 

The machine will complete the selected programme. 

Maintenance 

CLEANING THE EXTERIOR 

• 

Wipe up any detergent, bleach and other spills as they occur with 
a soft damp cloth. 

• 

Periodically clean the cabinet with a damp warm soapy cloth, rinse and dry. 

 

CLEANING THE interior 

• 

Clean the interior with 250ml of chlorine bleach mixed with 500ml of detergent.  

• 

Run the washer through a complete cycle. 

• 

Repeat the process if necessary. 

 

CARE 

• 

Do not put sharp metal objects in the washer. 

• 

Check all pockets for pins, paper clips coins, bolts, screws and such. 

• 

Do not lay these items on top of the washer after emptying the pockets. 

 

HOLIDAY CARE 

• 

If the washer will not be used for an extended period it is advisable to: 

• 

Remove the electric plug from the wall socket. 

• 

Turn off the water supply to the washer. 

 

CLEANING THE LINT FILTER

 

Pull the filter frame upwards.  Turn the filter inside out and 

remove any lint and dirt  

under running water. 

Filter 

Frame 

Re-shape the filter mesh 

and fit the filter frame 

back in it’s slot. 

Summary of Contents for LAUNDROMAID Electro Logic 920

















Reviews: