12
www.degardo.de LUNOCS
EN
A
+ +
A
+
A
B
C
D
E
A
874/2012
LUNOCS
Round / Flame / Cube
L
E
D
SAFETY NOTICES AND WARNINGS
These operating instructions apply to the Degardo LUNOCS lighting range. They contain all information
necessary for ensuring smooth operations and maintenance. The notices and instructions in this
manual must be observed and followed.
Repairs to electrical components may only be carried out by a qualified electrician!
Technical Specifications
Type
Flame
Round
Cube
Weight
8 kg
8 kg
8 kg
Electrical connection
220 - 240 V
220 - 240 V
220 - 240 V
Type of protection
IP 66
IP 66
IP 66
Power consumption
60 W
60 W
60 W
Lamps
LED
LED
LED
INSTALLATION AND INITIAL COMMISSIONING
Mounting with the pedestal (Figure A)
1. Insert the plug and cable through the tubular sleeve
2. Slide the tubular sleeve completely over the lamp shaft.
3. Insert the plug and cable through the centre hole in the base plate.
4. Use the three screws and washers to attach the base plate to the aluminium base of the lamp.
5. Position the lamp upright. Plug the power cord into a conventional 230-V power socket.
Mounting with the wall bracket (Figure B)
1. Insert the plug and cable through the tubular sleeve on the wall bracket.
2. Slide the tubular sleeve completely over the lamp shaft.
3. Use the three screws and washers to attach the wall bracket to the aluminium base of the lamp.
4. Use suitable fastening materials (not included) to mount the wall fixture to the wall.
5. Slide the wall bracket onto the wall fixture. Insert the screw and washer through the slot and screw
the wall fixture onto the wall bracket. Tighten the screw until the wall bracket and lamp housing are
securely tightened to the wall.
6. Use two screws and washers to attach the bottom cover to the wall bracket (insert the screws
through the slots).
7. Plug the power cord into a conventional 230-V power socket.
Type
A
B
C
Weight, mounting variants
9,0 kg
3,5 kg
3,2 kg
Notice:
The components must be stored and handled in a safe and protective manner during the entire
installation.