2.
The memory of the radio can last for 10 seconds, after that you may need to reset the time.
USE EXTERNAL POWER
Please use output DC 3V 300mA regulating external direct current power, check the polarity.
POWER ON/OFF
1.
Turn on and off the radio with the Power Switch. (1) or
2.
Make use of the alarm function : If you have set the alarm time, press the AL. ON/OFF button (15)
to turn on the function.
3.
Press the AL. ON/OFF (15) button again if you want to turn off the function.
4.
If the function has been turned on , you may need to turn the function off before you can power off
the radio.
BAND SELECTION
Select the desired band by moving the Band Selector (6) .
TUNING
After you have select the band, rotate the Tuning Switch (3) for the desired frequency.
TIME SET
1.
Under the off mode, keep the Time Set button (14) pressed, meanwhile press the HR button (16) to
adjust hour, Min button (2) to adjust minute.
ALARM SET
1.
Under the off mode , keep and AL. SET ON/OFF button (15) pressed. Press the Hr button (14) to
adjust hour and press the Min button (2) to adjust the minute.
2.
The radio will automatically enter into the wake-on-radio mode and will turn on at the preset
time .See the “Clock icon” on the screen.
ANTENNA
1.
The radio receives MW by using the internal magnetic antenna. You can get the best reception by
