Automatically locked
1
After four continuously wrong input, the panel will lock automatically for 1 minute
2
Another continuously wrong input will lock the panel for another 5 minutes
3
The panel will return to normal status until you input the right code
CAUTION
:The keypad is invalid during the lock status.
Set the user code
1
With the door unlocked, input original user code(1 to 8 digits), then press ’#’ button
2
With the green light on, press ‘*’ button, the yellow light on(without any follow operations in 8 seconds, the keypad
will exit changing state)
3
With both green light and yellow light on, input your new master code and press ‘*’to confirm
4
The new code will be confirmed by three beeps and yellow light off
5
Four beeps means the new code setting is failed
CAUTION
:Test the new user code several times before you close the door;
Set the master code
1
With the door unlocked, input original master code(1 to 8 digits), then press ’#’ button
2
With the green light on, press ‘*’ button, the yellow light on(without any follow operations in 8 seconds, the keypad
will exit changing state)
3
With both green light and yellow light on, input your new master code and press ‘*’to confirm
4
The new code will be confirmed by three beeps and yellow light off
5
Four beeps means the new code setting is failed
CAUTION
:Test the new master code several times before you close the door;
Set the emergency code
1
Press ‘#’ twice, the yellow light on(without any follow operations in 8 seconds, the keypad will exit changing state)
2
With the yellow light on, input your original emergency code and press ‘#’to confirm, the green light will on
3
With the green light on, press ‘*’, the yellow light will on
4
With both green light and yellow light on, input the new emergency code and press ‘*’ to confirm
5
The new code will be confirmed by three beeps and yellow light off
6
Four beeps means the new code setting is failed
CAUTION
:Test the new emergency code several times before you close the door;
Reset the user code and master code
1
Use the emergency code to open the door, the user code and master code will be reset to preset code automatically
