If you forget your programming code, you can reset the lock by the following steps：
Initialize by removing battery: Remove one battery (any one of the four batteries) , keep
pressing the black color privacy lock out mode button under the knob at the back panel
and do not loose your hand, then put the removed one battery back, and wait until you
hear 4 "Beep" sound, then the lock has been reset successfully (the "privacy lock out
mode button kept pressing" operation must maintain after you put the removed one
battery back, this period will take about 10 seconds).
To return the door lock to the factory default values and codes, choose one of the follow-
ing methods:
4. RESET
4.1. Virtual reset
Enter the
programming code
Enter the
programming code
3.6. Cancel automatic closing
1
2
3
4
5
6
7
8
C
0
9
Note:You can cancel
any of the processes by
pressing the
c
key.
Note: After resetting, all codes will be deleted
and the lock will revert to factory default state,
of which the lock programming code will be
back to 123456 and user code be back to 123.
1
2
3
4
5
6
7
8
9
0
C
1
2
3
4
5
6
7
8
9
C
0
4.2. Physical reset
Press the RESET button on back panel
09
Enter the
programming code
Press the “9” key
Press the “0” key
