8
3. Available versions
3.1
HVI Conductor (pre-assembled) / HVI long Conductor
In general, one conductor end of the pre-assembled
HVI Conductors
is fitted with the relevant connec
-
tion element as shown in Table 3, page 9 and Table 4, page 10. Thus, the head piece is fixed and a heat
shrinkable sleeve is wrapped around it. If required, the second conductor end can be shortened to
exactly match the loose connection element to the installation.
When ordering
HVI Conductors
, the conductor/minimum length must be observed/indicated. This in
-
formation is binding. Conductors cannot be returned since they are tailored to customer needs (pre-as
-
sembled conductor lengths). Pre-assembled
HVI Conductors
are available with a standard/minimum
length of 6 m and can be customised in 0.5 m steps. The standard/minimum length of 6 m must be used
in combination with a 3.2 m long supporting tube.
A loose connection element, heat shrinkable sleeve and hexagon socket wrench are included in deli
-
very (for one-time installation) (see also Table 3).
Special tools (
HVI cutter
and
HVI strip 20)
should be used to cut
HVI Conductors
to length/shorten
HVI Conductors
and the connection element/heat shrinkable sleeve should be attached considering
the relevant connection method (see 4., from page 16).
