10
1.
2.
press
size 00
1.
2.
press
size 00
Accessories
The two
M20 cable glands
(outer cable diameter: 6 - 12 mm) are loosely supplied with the
housing. They are intended for inserting two signal lines (see Fig. 3.3, page 9).
Note:
If required, the signal lines can also be led into the housing subsequently (
via M20 cable glands
).
In this case, the cover plate does not have to be removed. The signal lines can be directly fixed on the
cover plate using the cable clips (see Fig. 3.2, page 8).
3.4 Connection / disconnection of the control lines
The control lines Digital IN, Analog OUT, Digital OUT, external power supply are connected or
disconected by pressing in the terminal release (see Fig. 3.4).
Connection
Disconnection
b
Fig. 3.4 Connection or disconnection
