1
1. Safety advice
For a safe and trouble-free operation of the system please pay attention to the following manuals too:
•
Manual for commissioning
•
Operation manual GWM
New-installation: operating manual GWM (according to valid firmware)
•
Maintenance
•
Exchange of BMT-membrane
filter
•
Software-Update
Manual BMT-membrane filter exchange and software-update.
Instructions labelled with this symbol provide advice on technical information and tips for usage, which should
avoid any damage to the system. This symbol does not denote safety advice.
Instructions labelled with this symbol indicate that minor bodily injury or minor material damage can occur if the
precautionary measures are not heeded.
Instructions labelled with this symbol indicate that death, severe bodily injury or considerable material damage
can occur if the precautionary measures are not heeded.
This manual contains basic instructions, which should be taken into account during transportation, assembly, commissioning,
operation, maintenance, storage and disposal. The valid data, operating conditions and usage conditions specified in the tech-
nical datasheet and manual must be taken into account when using the
Watermanager GWM.
This installation manual is valid only in association with the corresponding valid operation manual GWM.
After any Software-Update please consider the new corresponding operation manual for the control unit.
•
Never exceed the permitted limits of use stated in the documentation with regards pressure, temperature, etc.
•
Follow all the safety advice and handling instructions in this manual.
•
Instructions displayed directly on the system must be heeded and must be kept in a completely legible condition. This
applies to:
−
Safety advice
−
Labels regarding connections
−
Type plate
•
Before assembly and start-up, the manual must be read by the user and the responsible specialist/operator. The manual
must always be available in the
Watermanager GWM’s
place of use.
•
Installation and maintenance work must only be carried out by an authorised professional with suitable tools.
•
The technical condition of the
Watermanager GWM
must be checked at regular intervals by the operator.
•
Local safety and accident regulations must be complied with when operating the
Watermanager GWM
.
•
The generally accepted rules of technology must be complied with for the assembly and operation of the appliance.
•
No changes to the
Watermanager GWM
are permitted. Any changes will lead to any warranty claims being void.
•
A defined or controlled restart of the process must be carried out after any interruption to the electricity or fluid supplies.
•
The operator is responsible for complying with the local conditions that are not detailed in this manual.
1.1.
Reference to other manuals
1.2.
Safety advice in these instructions
1.3.
General safety advice
