7
©
1999 Directed Electronics, Inc.
The status LED will stay on if you have entered Valet Mode, and it
will go out if you exited Valet Mode.
NOTE:
Remote Valet will not work with all factory keyless entry systems.
Some keyless entry systems do not work with a door open.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter! Just
press the lock button on your factory keyless transmitter twice
within three seconds to enter Panic Mode. The siren will sound and
the parking lights will flash for 30 seconds. To stop Panic Mode at
any time, press the unlock button on your factory transmitter.
NOTE:
The system can also be programmed so that pressing the lock but-
ton twice within three seconds will activate an optional accessory . If the
unit is programmed to activate an optional accessory, Panic Mode will not
be operational.
Nuisance Prevention
®
Circuitry
Your system has Nuisance Prevention
®
Circuitry (NPC
™
). This cir-
cuitry prevents annoying repetitive trigger sequences due to faulty
door pin switches or environmental conditions such as thunder,
jackhammers, airport noise, etc.
Here’s how it works:
The alarm triggers three times. Each time, the same sensor or
switch is triggering the alarm. The three triggers are within 60
Panic Mode
