background image

6

©

1999 Directed Electronics, Inc.

To turn off, or disarm the system, press 

again. The voice com-

mand module will announce “SYSTEM DISARMED” and the parking

lights will flash twice (optional).

Your system includes a High Security Disarm feature. During the

trigger sequence, using the remote transmitter to disarm the sys-

tem will only stop the trigger sequence (the siren will stop); how-

ever, the system will remain armed. This is extremely useful if you

must stop the system from sounding, but are unable to visually

check the vehicle. The trigger will stop, but the vehicle will remain

protected.

To disarm the system with the transmitter during a trigger, press 

on your transmitter. The siren will stop sounding. Next press

once more and the system will chirp two times and the system

will disarm.

To temporarily turn off the voice command module, use Silent

Mode

. Simply press 

briefly before arming or disarming, and

the voice confirmation will be eliminated for that one operation

only. If you want the arm/disarm voice command module turned

off permanently, consult with your dealer, or the installation guide.

Silent Mode

High Security Disarm

Disarming

Summary of Contents for 720T





















Reviews: