Connections-menu
Figure 3.35
Connections-menu.
•
IP address
of the IED is user settable. Default IP-address varies from device to another.
•
Network subnet mask
is entered here.
•
Gateway
is configured only when communicating with IEDs in separate subnet.
•
Bitrate
of the RS-485 serial communication interface is 9600 bps as standard but can be changed to 19200 or 38400 bps in case
the external device supports faster speed.
•
Databits
, parity and stopbits can be set according the connected external devices.
•
As default the IED does not have any serial
protocol
activated (None) but IEC103, ModbusIO and Modbus RTU can be used for
communication.
Note! When communicating with IED via front Ethernet port the IP address is always 192.168.66.9.
OPERATOR'S MANUAL 4189341220A UK
Page 38 of 51