proxSafe flexx
V08/09/09
ps_flexx_wi_en
39
5.4
Teach-in of keyTags
Now the system is ready to teach-in your keyTags. The first flexx will open and show the
following screen.
Now insert all your keyTags into the slots of
the first keyPanel of the open flexx. Once
the first keyPanel is filled, confirm by
pressing the red key <C>.
Proceed as well with the other keyPanels,
until all panels are filled.
Repeat this procedure with all flexx housings. If all keys have been inserted into the flexx
housings, your proxSafe flexx system is ready for test operation.
5.5
Test Operation
With the above procedure you have created a minimum key management system with the
following specifications:
•
one user named “administrator”
•
all keyTags named “keyTag Cxxyy”, where xx is the number of the flexx housing and yy
is the number of the slot, where this keyTag is located
•
an administrator, who has the right to access all keys and all configuration functions
of the terminal
You are now able to test all system functions.
Your system is now ready to receive data from your PC application.
Please return keyTag
C:Cancel
