DTE-3114 – Networked Quad QAM Modulator
USER
MANUAL
17
Variable
Description
Web
SNMP
Device status
Reflects the status of the device:
Normal operation
. The device is working properly.
Hardware error
. A serious and fatal error has occurred
in the hardware. The DTE-3114 cannot be used and
should be returned to the supplier.
Channel error
. One or more of the four QAM-
modulator channels is in an error state. See “Channel
operational status” in section 3.2.5.
Temperature error
. The internal temperature of the
DTE-3114 is too high (> 85˚C/185˚F). The RF output
is automatically disabled to reduce heat dissipation.
When the temperature drops below 85˚C/185˚F
again, the RF output will be enabled again.
NA
RO
Synchronise settings
Writing to this object will synchronize the value of the MIB
objects with the current run-time settings, see
section 3.4.2
NA
WO
3.2.2 Network Settings
Variable
Description
Web
SNMP
MAC address
The MAC address of the device
RO
RO
DHCP enable
Indicates whether the DTE-3114 shall obtain an IP
address through DHCP or whether a fixed IP address
shall be used
R/W
NA
IP address
IP address to use (fixed IP address mode)
R/W
RO
Subnet mask
Identifies which part of the IP address is reserved for the
network, and which part is available for host use (fixed IP
address mode)
R/W
RO
Default gateway
Identifies the IP address of the gateway that is used to
route IP packets that are not located on the current subnet
(fixed IP address mode)
R/W
NA
SNMP agent
Enable
Enable or disable SNMP agent
R/W
NA
Read community
String that is used as a password to enable reading of
parameters via SNMP
R/W
NA
Write community
String that is used as a password to enable writing of
parameters via SNMP
R/W
NA
