Obstacle clearances
When defining a flight, you must ensure that block area at the flight height and the selected takeoff and
landing locations are clear of obstacles. Obstacle clearances for each stage of the flight are shown below.
When you arrive at the site, visually check the takeoff and landing locations to ensure that the selected
locations are free of obstacles.
Obstacle clearances for takeoff
From 0 m (takeoff location) to 50 m:
Within the first 50 m (164 ft), there must be a clear area free of
obstacles within 30° to the left and right of the launch direction.
From 50 m to 280 m:
From the first 50 m (164 ft) and within 280 m (919 ft), obstacles must not appear
above the safety line determined by a 15° safety angle and within 25 m (82 ft) to the left and right of the
launch direction.
33
Delair-Tech
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
|
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech
.
