Note –
The order that you select the blocks from the list defines the sequence that the blocks are flown,
i.e. the first block selected is flown first, and so on.
The selected blocks are highlighted, and the flight lines and connection routes appear on the map.
The selected blocks are added to the flight summary, together with the default connection types. To view
the summary, tap
.
Note –
A block can be linked to more than one flight. To remove blocks from a flight, deselect the block in
the list or the map.
Viewing the flight summary
To view the flight summary, in the flight menu tap
.
The
Flight summary
screen looks similar to the example shown below:
Flight route
If a flight will cover more than one block, the software automatically connects the last waypoint of one
block with the first waypoint of the next block. By default the connection is a straight line.
42
Delair-Tech
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
|
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech
.
