Operating Modes
Quick Reference Guide
19
Pick Mode
Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern, which is
the area indicated by the two blue arrows. Pick Mode is a
Decod-ing and Transmission process where bar codes that
are not within the configurable distance from the center of
the aiming pattern are not acknowledged or transmitted to
the host. It is active only while the scanner is in Trigger
Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
Multiple Label Reading
The reader offers a number of options for multiple label read-
ing. See the PRG or software configuration tool for descrip-
tions of these features and programming labels.
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
PICK MODE
ENTER/EXIT PROGRAMMING MODE
♦
PIck Mode = Disable
Pick Mode = Enable