MERIDIAN SERIES
®
SOLID DOOR P
ASS-THROUGH FREEZERS
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
MERIDIAN SERIES
®
Solid Door Pass Through Freezers
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date____________________
SPECIFICATIONS
Exterior:
Cabinet front and shroud shall be 22-gauge
stainless steel. Exterior sides shall be aluminum. Facing
of shroud shall be easily removable without the use of
tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three epoxy-coated wire shelves per
door section. Shelf support pilasters shall be heavy-duty
with shelves adjustable at 1.0” (2.5 cm) increments.
Units are mounted on 6” (15.24 cm) metal legs.
Doors:
Solid doors shall have a 22-gauge stainless steel
exterior & anodized aluminum interior liner. Doors shall
be fully insulated with high density foamed in place
polyurethane. Each door shall have two self-closing,
cam-lift style hinges. Doors shall be easily removable
without use of tools. Door gaskets shall be magnetic
snap-in style to allow simple replacement. Door handles
shall be recessed.
• Please specify right or left hand hinging at time of
order.
Mechanical controls shall be located behind a removable
shroud facing.
Freezers:
Refrigeration system shall use R404A
refrigerant. System shall be completely outside food
zone to maximize internal storage space. System shall
utilize a dual diversion high flow air distribution system,
and shall be a high capacity design. Evaporator coils
shall have deep-corrugated, staged fin construction for
maximum efficiency with fewer defrost cycles. Cabinet
shall maintain 0
0
F internal temperature.
Single Voltage Models Only:
Electrical connections
shall be 115 volt, 60 hertz, single phase, with an
eight ft. (2.4m) long electrical cord & plug as shown
on reference chart. Cord & plug shall be wired to the
junction box on top of the unit.
Dual Voltage Models Only:
Electrical connections
shall be 115/208-230 volt, 60 hertz, single phase, and
must be hard-wired to the junction box located on top
of the unit.
MODELS:
MFPT2-S
Two section
Full height doors
MFPT2R-S
Remote
MFPT2-SH
Two section
Half height doors
MFPT2R-SH
Remote
STANDARD FEATURES
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with
minimal energy cost
• Easy to read dial thermometer
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Epoxy coated shelves—corrosion resistant, 300-lb.
capacity. Flexible placement on 1” centers allows
maximum storage
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters
MFPT2
