ST4464N FRONT
-BREA
THING SELF-CONT
AINED FLA
T TOP REFRIGERA
TORS
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
ST4464N FLAT TOP
Front-Breathing Self-Contained Compact Flat Top Refrigerators
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfi eld.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfi eld.com
Approval _________________
Date ____________________
MODELS:
❑
ST4464N
Two section refrigerator
❑
STD4464N
Twosection refrigerator
Flat top with a door
Flat top with drawers
STDST4464N
STANDARD FEATURES
• 1 epoxy coated wire shelf per section
• Hinging is on the right
• All 4400 and 4500 Series units are 100% front breathing,
which allows the unit to be pushed against a wall or built into
a cabinet or an existing line up
• Durable, rugged stainless steel sides, top and front
• Features Delfi eld’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
• Heavy duty self-closing hinges
• “ST” prefi x models have a 4” stainless steel backsplash
• “D” prefi x models feature Delfi eld’s exclusive new drawer
system. Drawers are backed by a 10-year warranty on the
track assembly
• Environmentally friendly R404A refrigerant
• High density foamed in place polyurethane keeps energy
costs low
• Black recessed quick grip handle
• Standard on 2” casters for easy cleaning and installation
• 60-cycle single phase electrical system
• 7’ cord and plug supplied
• One epoxy coated wire shelf standard, installed per door
section
• ACT solid state electronic control
• One year parts and 90 day labor standard warranty.
SPECIFICATIONS
Exterior top
is one-piece, 22-gauge stainless steel
with integral square nosing on the front.
Exterior back and bottom
are two-piece 24-gauge
galvanized steel.
Exterior ends
are stainless steel.
Interior sides of door models
are thermoformed ABS
plastic with integral shelves supports. Interior back is one-
piece 22-gauge stainless steel. Interior bottom and top
are thermoforned ABS plastic. Base is fully insulated with
high-density foamed in place polyurethane.
Refrigeration
system uses HFC-404A refrigerant.
Compressor is 1/5 H.P., with condenser coil and condensate
evaporator mounted on rear of the cabinet. Evaporator
coil are located on the interior rear wall of the cabinet.
Refrigerant flow is controlled by a capillary tube. Cabinet
maintains an interior cabinet temperature of 36°F to 40°F
(2°C to 4°C).
ACT control.
ACT electronic, solid state control, mounted
on the exterior rear of the cabinet, allows unit to maintain
precise temperatures in heavy duty conditions.
Electrical connections
are 115 volt, 60 Hertz, single
phase. Unit has a 7’ (2.1m) long electrical cord and NEMA
5-15P plug.
Casters:
Equipment is mounted on 2” (5.08cm) diameter
front locking plate casters. 2.5” (6.35cm) ride height.
Doors
have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet of door
models has one adjustable epoxy-coated wire shelf.
Drawers
have a 24-gauge stainless steel exterior
with thermoformed ABS plastic interior liner. Drawer
frames are 12-gauge stainless steel. Drawer slides are
11-gauge stainless steel with Delrin bearings. Drawer
units have two drawers. Top drawer holds one 12” x
20” (30.5cm x 50.8cm x 10.1cm) and three 1/6 size
4"-6" deep pans. Bottom drawer holds one 12" x 20"
and three 1/6 size 4" deep pans. Pans are supplied
by others.
OPTIONS AND ACCESSORIES
❑
18” wide single tier overshelf
❑
Stainless steel finish on back
❑
Plastic laminate on front
❑
Additional wire shelves
❑
Door lock
❑
*220V/50 Hertz electrical system
* Inclusion of this option will alter electrical
specifications of the unit.
