This is the self-test is process:
1) Ensure the power is connect ed, and the paper roll is properly installed.
2) Make sure that the printer is o and the top cover is properly shut.
3) Wait until the red light is o , release the paper feed button to print the
printer self-check page.
3.5.2 Printing with Windows driver
1) Please refer to the "Windows Driver Manual" to complete the installation.
2) Set the "Port" of the Windows driver to the corresponding interface.
3) Use the "Print Test Page" funct ion of the Windows driver to print a test page.
The usual pairing met hod as follows:
1. Turn on t he print er;
2. Search for ext ernal Bluet oot h devices t hrough t he main device ;
3. If t here are multiple ext ernal Bluet oot h devices, select t he print er;
4. Complet e mat ching
When pairing, the printer must be on.
3.6 Use of Bluetooth
It needs to be paired with the main device before using Bluetooth to print.
The pairing process is initiated by the main device.
TipsWhen pairing, please pair one-to-one, otherwise it may not be able to
determine which printer is paired successfully. After pairing successfully,
other host computers cannot be paired with the printer. If you need to pair
with other upper computers, you need to disconnect it rst.
Print Using Bluetooth Interface:
For PCs with virtual Bluetooth serial ports (such as mobile phones using
SMARTPHONE, POCKET PC, PALM, notebook computers, etc.), after pairing
successful, you can send print data to the printer through the virtual Blue-
tooth serial port for printing.
Notes: E581P does not support Bluetooth function.
