3.5 Operation panel
Power-on: When connected to power supply, move the power switch on
the back side of the printer into the On position, the printer turns on and
the indicator light is on.
Power-off: Move the power switch on the back side of the printer into
the Off position, the printer turns off and the indicator light is off.
Paper feed:
1. Press the paper feed button and the printer will feed the paper to the
specified outlet according to the type of paper used. For continuous
paper, press and hold the paper feed button and the printer will feed a
fixed length of paper; if you are using label paper, press the paper feed
button once to feed out a whole page of label.
2. Press the paper feed button to pause the current printing task and the
indicator light turns white (blue, green, red), press this button again to
resume the unfinished printing task;
Description for indicator status:
Blue
Green
Red
√
-
-
Blue
On
Printer is ready for operation
√
-
-
Blue
Blinking
RAM test failed
√
-
√
Pink
On
Printer head is overheated
√
-
√
Pink
Blinking
No or low printer ribbon
-
-
√
Red
On
Position sensor is not in place
-
-
√
Red
Blinking
Out of paper
-
√
√
Yellow
On
Voltage is too low or too high
-
√
√
Yellow
Blinking
Paper jam
√
√
√
White
On
Printer paused
LED Indicator
Printer status
Color
Display color
Status
Summary of Contents for 888T
