28
Security
This device provides complete wireless security function include WEP, 802.1x, WPA-TKIP, WPA2-AES and WPA2-Mixed in
different mode (see the Security Support Table).
The default security setting of the encryption function is disabled. Choose your preferred security setting depending on what
security function you need.
Encryption
Wired Equivalent Privacy (WEP) is implemented in this device to prevent unauthorized access to your wireless network. The
WEP setting must be the same as each client in your wireless network. For more secure data transmission, you can change
the encryption type to
“WEP” and click the “Set WEP Key” button to open the “Wireless WEP Key setup” page.
When you decide to use the WEP encryption to secure your WLAN, please refer to the following settings of the WEP
encryption:
64-bit WEP Encryption: 64-bit WEP keys are as same as the encryption method of 40-bit WEP. You can input 10
hexadecimal digits (0~9, a~f or A~F) or 5 ACSII chars.
Summary of Contents for DLB27 Series
