Table 1 IP address range assignments (continued)
IP Range
Allocation
Component
Description
Sample Hostname
+5
Avamar
Avamar Proxy VM
idpa-
avproxy.domain.local
+6
IDPA System Manager
IDPA System Manager
VM
idpa-sysmgr.domain.local
+7
Data Protection Advisor
Application Server Host
VM
idpa-dpa1.domain.local
+8
Data Protection Advisor
Datastore Server Host
VM
idpa-dpa2.domain.local
+9
Data Protection Search
Index Master Node Host
VM
idpa-search.domain.local
+10
DD Cloud DR CDRA
(optional)
Data Domain Cloud
Disaster Recovery (DD
Cloud DR) Cloud DR
Add-on (CDRA) virtual
appliance
idpa-cdra.domain.local
The following three IP addresses are required for additional connectivity, but are not configured as
a part of the range.
Table 2 Additional IP addresses
Component
Description
Sample Hostname
ESXi
VMware ESXi
idpa-esxi.domain.local
Appliance Configuration
Manager (ACM)
ACM VM
idpa-acm.domain.local
iDRAC
Integrated Dell Remote
Access Controller
idpa-idrac.domain.local
Install Network Validation Tool
The Network Validation Tool (NVT) for IDPA runs multiple automated tests to validate the network
configuration. You must run the NVT for IDPA from a system on the management network.
Before you install IDPA, network configuration must be completed for the datacenter. After the
network configuration is complete, you must install and run the Network Validation Tool to validate
the network configuration for a successful deployment of IDPA in the datacenter. To download the
NVT, and for more information about NVT, see
https://help.psapps.emc.com/display/HELP/
Install the rails
About this task
The rails are labeled left and right, and cannot be interchanged. The front side of each rail is
labeled Left Front or Right Front when the rail faces the cabinet front.
Dell EMC Integrated Data Protection Appliance DP4400 2.3 Installation Guide
5
