Removing the battery
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Topics:
•
Procedure
1. Close the display and turn the computer over.
2. Slide the battery-release latch to the unlock position.
3. Lift the battery at an angle and remove the battery from the battery bay.
a. battery
b. battery-release latch
4. Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
3
Removing the battery
11
Summary of Contents for Inspiron 14 5000
