Replacing the optical drive
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Topics:
•
•
Prerequisites
Remove the
Procedure
1. Remove the screw that secures the optical-drive assembly to the computer base.
2. Using a plastic scribe, slide the optical-drive assembly out of the optical-drive bay.
1. screw
2. plastic scribe
3. computer base
4. optical-drive assembly
3. Carefully pull the optical-drive bezel and remove it from the optical drive.
4. Remove the screws that secure the optical-drive bracket to the optical drive and remove the optical-drive bracket.
5
Replacing the optical drive
13
Summary of Contents for Inspiron 14 5000
