Removing the base cover
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Topics:
•
•
Prerequisites
Remove the
Procedure
1. Remove the screws that secure the base cover to the computer base.
2. Using your fingertips, gently pry the base cover off the computer base.
a. computer base
b. screws (2)
c. base cover
9
Removing the base cover
19
Summary of Contents for Inspiron 14 5000
