Removing the display back-cover and antenna
assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance
Topics:
•
•
Prerequisites
NOTE:
These instructions are applicable only for laptops with a non-touchscreen display.
1. Remove the
.
2. Remove the
3. Remove the
.
4. Remove the
.
5. Follow the procedure from step 1 to step 3 in “
6. Remove the
.
7. Remove the
8. Remove the
9. Remove the
.
10. Remove the
11. Remove the
.
12. Remove the
.
13. Remove the
.
14. Remove the
15. Remove the
.
16. Remove the
.
Procedure
After performing the steps mentioned in the prerequisites, we are left with the display back-cover and antenna assembly.
49
Removing the display back-cover and antenna assembly
75
Summary of Contents for Inspiron 14 5000
