background image

Parameters

Table 22. Firmware File information

Parameter

Description

-file

Specify the file at the given path used for the command.

-outputformat

You can specify the following output formats: XML or JSON.

-h 

Provides more information about the command, description, and 
usage.

NOTE: 

If the filename contains special characters, you must enclose the file path within escaped double quotation marks.

View event log 

Description

View all or part of the contents of the event log file based on date range and logging level.

Command syntax

shmcli (view log | vlog) ([-startDate=<StartDate> -endDate=<EndDate> -event=<EventType>] | [-

event=<EventType> -count=<LatestEventCount>] | [-h])

Parameters

Table 23. View event log

Parameter

Description

-h

Provides more information about the command, description, and usage.

-startDate 

Display logs recorded on or after this date. Acceptable format is MM/DD/YY.

-endDate 

Display logs recorded no later than this date. Acceptable format is MM/DD/YY.

-count 

Display the latest number of events of a specified category. The viewable count of latest events can be a 
value from 1 to 1000.

-event 

Display logs of the given event severity type. This could be either of the following: INFO, CRITICAL, 
ERROR, or WARN. Logs are printed irrespective of the severity level, if this argument is not provided.

View MD3060e SAS diagnostics

Description

Displays a list of SAS diagnostic information associated with the supplied enclosure.

CLI reference

35

Summary of Contents for MD1280


























































Reviews: