Table 3. Status LED indicators and descriptions
Icon
Description
Condition
Corrective action
Electrical indicator The indicator turns solid amber if the
system experiences an electrical error
(for example, voltage out of range, or
a failed power supply unit (PSU) or
voltage regulator).
Check the System Event Log or system messages for the
specific issue. If it is due to a problem with the PSU,
check the LED on the PSU. Reseat the PSU.
If the problem persists, see the
section.
Memory indicator
The indicator turns solid amber if a
memory error occurs.
Check the System Event Log or system messages for the
location of the failed memory. Reseat the memory
module.
If the problem persists, see the
section.
PCIe indicator
The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for the
PCIe card. Reinstall the card.
If the problem persists, see the
section.
NOTE:
Expansion card installation guidelines
For
more information about the supported PCIe
cards, see the section.
Identifier
GUID-2B439204-6CA8-43A3-A9BD-3E0D535C4C80
Status
Released
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 4. System health and system ID indicators
Table 4. System health and system ID indicator codes
System health and system ID indicator code
Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber
Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Blinking amber
Indicates that the system is experiencing a fault. Check the System
Event Log or the LCD panel, if available on the bezel, for specific error
messages. For more information about error messages, see the
Dell
Event and Error Messages Reference Guide
at
Dell.com/
openmanagemanuals
>
OpenManage software
.
12
NX3240 system overview
