Figure 44. Removing the system battery
4
To install a new system battery, hold the battery with the positive side facing outwards and push the battery into the holder until it
clicks into place.
Next step
•
Follow the procedures in
After working inside your system
Replacing the optional internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the system, the maximum permissible dimensions of the USB memory
key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1
Follow the safety guidelines listed in
2
Follow the procedures in
Before working inside your system
3
Remove expansion card riser.
Steps
1
Locate the USB port or USB memory key on the system board.
To locate the USB port, see the
section.
2
If installed, remove the USB memory key from the USB port.
Figure 45. Removing the internal USB memory key
1
USB memory key
2
USB port
3
Insert the replacement USB memory key into the USB port.
Next steps
1
Install the expansion card riser.
Disassembly and reassembly
77
