Figure 40. Removing the NVDIMM-N battery from the air shroud
Next steps
Install the NVDIMM-N battery into the air shroud
.
Installing NVDIMM-N battery into air shroud
Prerequisites
Follow the safety guidelines listed in
CAUTION:
NVDIMM-N battery is not hot swappable. To prevent data loss and potential damage to your system, ensure
that your system, LEDs on system, LEDs on NVDIMM-N and LEDs on NVDIMM-N battery are turned off before installing
the NVDIMM-N battery.
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing or
removing a battery.
Steps
1. Incline the NVDIMM-N battery at an angle and place the battery on the air shroud slot.
2. Using Phillips #2 screwdriver, tighten the screw to secure the NVDIMM-N battery.
3. Connect the cables to the NVDIMM-N battery.
Installing and removing system components
89