Icon
Description
Condition
Corrective action
If the problem persists, see
PCIe
indicator
The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for the PCIe card. Reinstall
the card.
If the problem persists, see
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 20. System health and system ID indicators
Table 24. System health and system ID indicator codes
System health and system ID indicator code
Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber
Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Blinking amber
Indicates that the system is experiencing a fault. Check the System
Event Log or the LCD panel, if available on the bezel, for specific error
messages. For more information about error messages, see the
Dell
Event and Error Messages Reference Guide
at
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 21. iDRAC Quick Sync 2 indicators
34
System diagnostics and indicator codes