Figure 18. Removing the PCIe card module
4. Remove the screw securing the PCIe card to the bracket.
5. Pull the PCIe card out of the connector on the riser board.
Next steps
Installing the PCIe card module
Prerequisites
1. Follow the safety guidelines listed in
.
2. Follow the procedure listed in the
Before working inside your system
Steps
1. Insert and push the PCIe card into the internal riser board.
2. Tighten the screw to secure the PCIe card on the bracket.
3. Install the PCIe card module into the system board and press until the riser board fits into place.
4. Secure the PCIe card module with the four screws.
52
Installing and removing system components
