Introduction
After you have installed the X400 Appliance in a rack and powered on the X400 cubes,
you must configure the X400 Appliance in the PowerProtect X400 Appliance
Configuration UI. In the PowerProtect X400 Appliance Configuration UI, there are
three phases of installation steps to complete: Connect, Configure, Support.
1.
2.
3.
Set up the X400 Appliance support settings
on page 74
After you have completed the above steps as the root user in the PowerProtect X400
Appliance Configuration UI, you
to the PowerProtect Data
Manager UI so that you can monitor, manage, protect, and recover data across your
enterprise. For more information on how to perform data protection operations in the
PowerProtect Data Manager UI, see the
PowerProtect X400 Appliance Administration
and User Guide
.
Connect to the X400 Appliance
Before you begin
l
The X400 cubes must be
l
information before configuring the X400 Appliance in the UI.
l
The laptop you use for the initial login to the UI must have
and it must be connected to an available switch port that is in the same L2
network in which the X400 platform cube resides.
About this task
The first phase of installation steps in the PowerProtect X400 Appliance Configuration
UI is connecting to the X400 Appliance which includes specifying:
l
A new admin password
l
The serial number of each X400 capacity cube
l
Internal (private) network IP addresses
l
External (public) network IP addresses
Procedure
1. Type the following URL in your browser's address bar:
https://
<appliance_serial_number>
.local:8543/acm
The 14-character appliance serial number is located on the white label on the
information tag in the front of the X400 platform cube.
example:
https://apm00192023388.local:8543/acm
Note:
The X400 Appliance automatically downloads the PowerProtect X400 license
when you initially connect to the appliance (provided that the laptop with which
you are connecting has external internet connectivity). If the automatic license
Configure the X400 Appliance in the UI
68
PowerProtect X400 Appliance Hardware Configuration and Installation Guide