You can find additional information from the VCO or the Dell EMC support site at
. If you did not receive an email, request the setup instructions
from your IT administrator or open a Dell EMC support request.
4
Connect local devices such as computers and switches to either GE1 or GE2 ports.
•
GE1 or GE2 ports
NOTE:
The RJ45 ports on the left side of the box are for console/
administration access only.
After following these instructions, if you are still unable to activate the Edge, contact your IT
administrator or open a Dell EMC support request.
Specifications
Table 1. Edge 3000 Series specifications
Feature
Specification
Size
17.1 in x 15.0 in x 1.72 in (W x D x H)
43.4 cm x 38.1 cm x 4.37 cm (W x D x H)
Chassis weight with factory-installed
components including one rNDC carrier
card, one rNDC card, and one blank panel
•
16 core: 16.50 lbs (7.48 kg)—2 PSUs
and 5 fans
•
8 core: 16.60 lbs (7.53 kg)—2 PSUs and
4 fans
AC power input
100 VAC–240 VAC, 50/60 Hz
AC typical current draw per system
•
16 core: 110 VAC: 1.89 A
•
8 core: 110 VAC: 1.62 A
•
16 core: 240 VAC: 0.87 A
•
8 core: 240 VAC: 0.75 A
6
Edge 3000 Series
