background image

Template Last Updated - 2/7/2007

Internal Card With Bluetooth

®

 Wireless Technology

87

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Internal Card With Bluetooth

®

 

Wireless Technology

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions that shipped with your computer.

If you ordered a card with Bluetooth wireless technology with your computer, 
the card is already installed. 

Removing the Card

1

Follow the procedures in "Before Working on Your Computer" on page 29.

2

Remove the hard drive cover. See "Removing the Hard Drive" on page 33 
for an illustration of the hard drive cover.

3

Remove the WLAN card (see "Removing a WLAN Card" on page 37).

4

Remove the hinge cover (see "Removing the Hinge Cover" on page 53).

5

Remove the keyboard (see "Removing the Keyboard" on page 57).

6

Remove the display assembly (see "Removing the Display Assembly" on 
page 65).

7

Remove the palm rest (see "Removing the Palm Rest" on page 79).

8

Remove the M2 x 3-mm screw that connects the card to the USB board. 

9

Lift the card and cable and disconnect the card connector from the card.

10

Remove the card from the card compartment.

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Reviews: