4.
5.
You can also use one, two, or three-digit speed dial or group dial numbers.
Press
Select
(
)
to confirm the number. The display asks you to enter another fax number.
6.
Press
Select
(
) to enter other number.
7.
Or, press
Scroll
(
or
) to select
No
and then press
Select
(
).
If you want to enter more fax numbers,
repeat steps 5 and 7 . You can add up to 10 destinations.
8.
NOTE:
You cannot use more than one group dial number per broadcast operation.
When you finish entering fax numbers, press
Start
(
).
9.
The document is scanned into the memory before transmission. The display shows the memory
capacity and the number of pages being stored in the memory.
For documents loaded on the document glass, the display asks if you want to load another page.
Select
Yes
to add. Otherwise, select
No
.
The printer begins sending the document in the order of the numbers that you have entered.
10.
Sending a Delayed Fax
You can set your printer to store and then send a fax at a later time.
Load the document(s) face up with top edge in first into the DADF.
1.
OR
Place a single document face down on the document glass.
For details about loading a document, see "Loading an Original Document" .
Press
Scroll
( or ) to highlight
Fax
and then press
Select
(
).
2.
Adjust the document contrast and resolution to suit your fax needs.
3.
For details, see "Adjusting the Document Contrast" and "Adjusting the Document Resolution" .
Press
Scroll
(
or
) to highlight
Delay Fax to:
and then press
Select
(
).
4.
Enter the number of the remote machine using the number keypad.
5.
Downloaded from ManualsPrinter.com Manuals
