Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will
automatically "wake up".
The following table shows the power consumption and signaling of this automatic power saving feature:
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Monitor Flat panel only (VESA Mode)
6.5 Kg (14.3 lb)
Weight with packaging
11.2 Kg (24.7 lb)
Environmental
The following table lists the environmental limitation:
Temperature:
Operating
5° to 35°C (41° to 95°F)
Non-operating
Storage: 0° to 60°C (32° to 140°F)
Shipping: -
20° to 60°C(
-
4° to 140°F)
Humidity:
Operating
10% to 80% (non-condensing)
Non-operating
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing)
Altitude:
Operating
3,657.6 m (12,000 ft) max
Non-operating
12,192 m (40,000 ft) max
Thermal dissipation
375.0 BTU/hour (maximum)
195.0 BTU/hour (typical)
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal
operation
Active
Active
Active
Green
110W (maximum)*
57W (normal)**
Active-off mode
Inactive
Inactive
Blanked
Amber
Less than 2 W
Switch off
-
-
-
Off
Less than 1 W (at 230 V)
* With Audio + USB
** Without Audio + USB
