USB Downstream Connector
USB Ports
z
1 upstream - rear
z
4 downstream - 2 on rear; 2 on left side
Card Reader Specifications
Overview
z
The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and
into the memory card.
z
The Flash Memory Card Reader is automatically recognized by Windows 2000 and XP.
z
Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
z
All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
Features
The Flash Memory Card Reader has the following features:
z
Supports Windows 2000 and XP operating systems
z
No Windows 9X support from Dell
z
Mass Storage Class device (No drivers are required under Windows 2000 and XP)
z
USB-IF certification
z
Supports various memory card media
1
DMU
2
VCC
3
DPU
4
GND
Pin Number
4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND
NOTE:
USB 2.0 capability requires 2.0 capable computer
NOTE:
The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.
Page 9 of 11
Documentation
12/10/2007
http://support.dell.com/support/edocs/monitors/2407WFP/en/about.htm